Sealing pliers for composite films 400 SZ
A permanently heated sealing pliers that is both easy to use and lightweight and absolutely safe to handle and protect workers?
There isn't one? Yes!
Couldn't load pickup availability
sealing pliers polystar® 400 SZ
Light as a feather and safe!
Description
Description
Sealing as light as a feather: safe and fast!
A permanently heated sealing pliers that is both easy to use and lightweight and absolutely safe to handle and protect workers? Doesn't exist?
But!
The sealing pliers type 400 SZ of the brand polystar® combines exactly that: safety and lightness - and it is GS-tested.
As with all polystar® When designing film sealing devices and continuous sealing machines, we place great importance on user safety. We have noticed that although there are many permanently heated sealing tongs on the market, very few focus on operator safety: the sealing tongs are usually top-heavy and the handles are uncomfortably warm. The closer you get to the sealing elements, the greater the risk of burns for the user.
This naturally made us even more motivated to make it better - i.e. to make this article safer and easier for you.
When designing the 400 SZ sealing pliers, we were inspired by our heat impulse welding pliers. The ergonomics of the pliers used here have proven themselves over decades. We also chose a cable length of five meters so that you have a sufficient radius of action with the permanently heated sealing pliers. On the other hand, we have dispensed with a stationary table clamp with a foot pedal because our experience shows that our customers like to be able to handle the pliers flexibly. And with a weld seam length of 400 mm, conventional composite films, aroma bags and bags made of kraft paper that are coated with polyethylene on the inside can be easily sealed.
Sealing pliers with heat protection / protection against burns:
- At the polystar® The 400 mm long sealing jaws (weld length) of the hot sealing pliers 400 SZ are behind a heat-protecting polycarbonate cover. Only a slight amount of waste heat penetrates through the cooling slots.
- The pliers handles only get warm to the touch - thanks to our reliable heat insulation.
- When not in use, the sealing elements are closed and protected by the polycarbonate cover. It is almost impossible to burn your hands “by accident”, for example.
Easy operation of the brand sealing pliers polystar® :
- Seal composite films permanently and continuously with the lightweight 1.5 kg.
- No top-heaviness and therefore no unergonomic and tiring work.
- Easy opening/closing of the heat sealing pliers by squeezing/releasing the pliers handles.
- When the heat sealing tongs (sealing jaws) are closed, the sealing process begins.
- Adjust the sealing temperature using a rotating dial in the pliers handle.
- Setting the sealing time using the special handle electronics.
- Optical and acoustic status display.
- Optical and acoustic error signal in case of deviations/incorrect operation.
- With a weld seam length of 400 mm, most commercially available aroma bags, ziplock bags made of composite films or other sealable films (no PE films!) can be sealed.
Working with your hands - it's so easy with the safe sealing pliers
Plug the power cord into the socket, switch it on, set the sealing temperature and sealing time, wait a moment and off you go: Open the sealing pliers and position the bag made of composite film between the sealing jaws. Then simply close the sealing pliers and observe the visual and acoustic status display. Once the sealing is complete, open the sealing pliers again. Remove the sealed composite film with your perfectly protected item. Done! Your items cannot be packaged more securely.
With the polystar® With the heat sealing pliers type 400 SZ, you can easily seal your high-quality items in aluminum or paper composite films and/or PA/PE and PP films: airtight and aroma-tight.
But Doypack bags and other aroma bags can also be sealed within a very short time - if the sealing performance is adjusted accordingly. polystar® Heat sealing tongs type 400 SZ can also be used in shops of bakeries, confectioners, coffee roasters, etc. This way you can safely hand over the freshly packaged - and aroma-sealed - goods to your customers for transport home.
Of course, the permanently heated polystar® The 400 SZ hot-sealing pliers are also suitable for use for hours. This means that ongoing production runs with high quantities can also be sealed without any problems.
By the way: If you prefer to seal your items with your foot instead of your hand - have a look at the permanently heated heat sealing device polystar® 260 HSG. This item is equipped with a foot pedal or foot pressure button and a weld seam length of 260 mm.
Important: The polystar® Sealing pliers are not suitable for polyethylene films.
Our machines are suitable for sealing bags or films made of polyethylene. polystar® Heat impulse welding machines or the fast continuous welding machines of the polystar® 350/5 DSM series.
Technical data
Technical data
Technical data | polystar® 400 SZ | |||
---|---|---|---|---|
Seal seam length, max. | 400 mm | |||
seal seam width | 12 mm wave embossing | |||
sealing temperature | adjustable 100 - 220°C | |||
power consumption | 1.8 A | |||
electricity consumption | approx. 0.4 kWh | |||
Dimensions | 425 x 300 x 130 mm | |||
net weight | 1.5 kg | |||
power connection | 230 V/50 Hz | |||
The sealing pliers are supplied with a 5m connection cable. Dimensions and weights are approximate. Technical changes reserved! |
product safety
product safety
Manufacturer:
Rische + Herfurth GmbH
Kedenburgstr. 53-59
22041 Hamburg
Tel.: 040 / 656 90 3-0
Email: info@polystar-hamburg.de
WEEE Reg.No. DE48588228 (ElektroG)
CE marking
sealing pliers polystar® 400 SZ
