Film sealing machines with holding magnet 240 M series
The hand-operated lever arm devices of the polystar® brand are ready for use immediately and without warm-up time and work absolutely reliably.
Film sealing machines with holding magnet 240 M series - 250 mm - polystar® 243/243 M / with holding magnet is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Film sealing machines with holding magnet 240 M series
table-top film sealer
Easy to use with and without a holding magnet.
Description
Description
Order with a clear view: Welding without learning time with holding magnet
Small, practical, simple - these are the first characteristics that come to mind when you think of polystar® Film sealing devices with lever arms come into play.
- Small: they are real space savers in terms of depth and height (without optional accessories such as extension table and/or unwinder).
- Practical: they can be used in many ways.
- And simply: welding without any training time is not just a careless promise.
The hand-operated lever arm devices of the brand polystar® work with the energy-saving (from 0.1 kWh) - and therefore environmentally friendly - heat pulse process. In addition, these film sealing devices are ready for use immediately and without a warm-up time and work absolutely reliably.
Do you use pre-made bags made of polyethylene (PE bags) or polypropylene (PP bags)? No problem - just fill the bag and seal it. Done!
Or do you make your own bags from a tube, e.g. PE tubular film? No problem either: cut to length as required, weld the bottom seam and operate the cutting device manually at the same time. Then fill the bag and weld it shut - and you're done!
You can adjust the length of the welding pulse directly on the polystar® The film sealing device can be adjusted continuously and depends on the film material and the film thickness. For example, PE films up to 2 x 0.25 mm thick can be sealed. The reliable heat pulse principle and the optical control (light display) ensure optimal sealing results.
Put together your own individual packing station: With an attachable table and film dispenser or film roll magazine, you can create order in your workplace.
Possible areas of application for these reliable helpers are, for example, warehouses, workshops or sales areas, because they pack everything: screws and other small materials, pipes, signs, textiles... There are -almost- no packaging limits.
The M-version devices have an additional holding magnet and an automatic welding and cooling timer.
Technical data
Technical data
| Technical data | polystar® 243 / 243 M | polystar® 423 / 423 M | polystar® 583 / 583 M |
|---|---|---|---|
| Weld seam length, max. | 250 mm | 440 mm | 600 mm |
| weld width | 1.5 mm | 1.5 mm | 1.5 mm |
| power consumption | 0.5 A / 0.6 A | 1.1 A / 1.2 A | 1.4 A |
| electricity consumption | 0.1 kWh / 0.14 kWh | 0.22 kWh / 0.28 kWh | 0.33 kWh / 0.31 kWh |
| Dimensions | 420 x 120 x 135 mm | 720 x 120 x 135 mm | 880 x 120 x 135 mm |
| net weight | 4.1 kg / 4.7 kg | 6.8 kg / 7.0 kg | 7.7 / 8.0 kg |
| power connection | 230 V/50 Hz | 230 V/50 Hz | 230 V/50 Hz |
| All devices are supplied with a 3m connection cable. Dimensions and weights are approximate. Technical changes reserved! |
|||
product safety
product safety
Manufacturer:
Rische + Herfurth GmbH
Kedenburgstr. 53-59
22041 Hamburg
Tel.: 040 / 656 90 3-0
Email: info@polystar-hamburg.de
WEEE Reg.No. DE48588228 (ElektroG)
CE marking
Matching device accessories
| Facet | |||
|---|---|---|---|
| Price | |||
| Price |
From
€63,00
Unit price
/
Unavailable
|
€199,00
Unit price
/
Unavailable
|
From
€69,00
Unit price
/
Unavailable
|
FAQ about the polystar® 240 M series
Does the lever arm have to be kept pressed down during the entire welding process?
Does the lever arm have to be kept pressed down during the entire welding process?
No, the lever arm does not need to be held down during the welding process. The lever arm is held in the welding position by the holding magnet.
Are there any wearing parts?
Are there any wearing parts?
Typical wear parts are:
- Heating elements. These can be replaced very easily: lever out the old heating element, insert the new heating element and then simply carry on welding!
- Silicone rubber profile, sponge rubber or foam profile. Easy replacement by pulling out the old profiles and threading in new profiles - without any tools.
- Blade for the cutting device. Guide the cutting device to the right and pull it out upwards. Remove the old blade, attach the new blade and then reinsert the cutting device into the lever arm on the right. Done!
Please read the operating instructions for this.
Do I have to disassemble the lever arm to replace the cutting blade?
Do I have to disassemble the lever arm to replace the cutting blade?
The lever arm does not need to be disassembled. The blade holder can simply be removed from the right side of the lever arm. You can find detailed instructions in our user manual.
How often do the wearing parts need to be replaced?
How often do the wearing parts need to be replaced?
How often the wearing parts, such as the heating element, need to be replaced depends on many factors, such as the type and thickness of the material, performance or service life. There is therefore no clear answer here.
Which materials can be welded with the polystar® 240 M series?
Which materials can be welded with the polystar® 240 M series?
Polyethylene, polypropylene and PA/PE films can be welded. Other types of material are also possible. Please feel free to contact us.
What material thickness can be welded?
What material thickness can be welded?
For example, polyethylene films with a thickness of 2 x 0.25 mm can be welded. The information may vary for other materials.
Do I have to disassemble the lever arm to replace the cutting blade?
Do I have to disassemble the lever arm to replace the cutting blade?
The lever arm does not need to be disassembled. The blade holder can simply be removed from the right side of the lever arm. You can find detailed instructions in our user manual.
polystar® 240 M series
